This is a demo store. No orders will be fulfilled.
-
LSD Exclusive
- Nationwide Delivery
Nearly all full pack prices include delivery to most of the UK within 3-5 working days. Extras available:
- Next day delivery
- Saturday delivery
- AM delivery
- Split Packs
We split packs of paving to save you money and to cut down on wastage. Remember to buy 10% more though for cuts and breakages!
Look out for the below icons to show if we split packs.
- Bespoke Cuts
Custom made, bespoke natural stone products
- Garden Ideas
- Advice & Guides
Suppliers guides and design software
Jointex - Easy Joint - Pointing Mortar
Quick Find Code:
050090
Jointex - Easy Joint - Pointing Mortar
Quick Find Code:
050090
Marshalltown - Pointing Tool - Brick Jointer Ideal for Romex Rompox, Easy Joint Jointex and A-Joint
£10 .80
per item
inc VAT
Easy Joint is a 1 component, air oxygen hardening pavement fixing mortar, ready mixed and packed for immediate use. It is permanently water permeable, resistant to high-pressure cleaners and prevents weeds from sprouting. Ideal for the jointing of natural and concrete stone paving as well as slabs and surfaces outdoors. The neutral sand colour tends to be used in lighter colouring paving joints, however, it has been known to be used on black paving to create a real statement. Large Stocks Available. Something to make note of when using Jointex or Rompox on a dark patio especially on a hot day we advise using a lot more water, to begin with. This is needed to cool the surface so it doesn't dry out too quickly as this can end up staining the slabs. The slabs we have found this to happen on are the dark slate paving and the dark granite slabs.
| Quick Find Code | 050090 |
|---|---|
| Manufacturer | Jointex |
| Container Coverage | 1 tub covers 15 - 20sqm on a 15.3sqm patio pack of paving slabs, please see spec for indepth measurements |
| Container Size | 15-25kg |
| Size | NA |
| Usage Instructions |
The minimum joint width is now 3mm. JOINTEX EASY JOINT can be used in two different ways: a) First way ( traditional way ) 1. Watering the surface 2. Open the bucket and empty the plastic back onto the surface that is to be joint fixed. 3. Using a hard broom or rubber broom, work the material in a deep, firm and compact into the joints. 4. Brush away any remaining mortar residue with a soft broom diagonally to the surface.FINISHED!!!!No further equipment or additives are necessary.
b) Second way ……NEW ……NEW ……NEW 1. Watering the surface 2. To achieve a better self-compacting result without a visible shiny surface, the area can be well pre-wet with water. 3. Open the bucket and pour JOINTEX® EASY Joint onto the surface that is to be joint fixed. 4. Using a hard broom or rubber broom, work the material in a deep, firm and compact into the joints. 5. After approx. 10 minutes flush the material into the joints with a spray-like jet of water.< So you achieve a better self-compacting result > Sagged joints should be refilled. 6. Brush away any remaining mortar residue with a soft broom diagonally to the surface.FINISHED !!!! This technique should only be applied to surfaces with highly water-permeable subsoil.
Curing Time The first technique ( traditional technique) The surface can be walked on after approximately 6 to 8 hours and is fully load-bearing after Approximately 3 days(Calculation: ca. +20° C and ca. 65% humidity ) Second technique new…..new….new…new The surface needs a much longer hardening time. Approximately 48 hours (Calculation: ca. +20° C and ca. 65% humidity) High temperatures increase, low temperatures decrease hardening times. Clean used working tools with water or with the usual cleaner. Not in the hands of children!! |