The surface to be treated must be absorbent, clean and completely dry.

Generously apply a consistent amount of Lithofin SPLASH STOP with a brush or roller. In case of very absorbent materials, repeat the application after approx. 30 to 40 minutes. Avoid puddles, drips and foam. Do not allow the product to dry on the surface. Immediately distribute and remove surface residues with a cloth. 

Please Note: always try the product in an inconspicuous area prior to use. Non absorbent and wet surfaces cannot be treated. Glass, plastics and other solvent sensitive surfaces must be protected against splashes. 

The surface temperature must be between 10°C and 25°C. Do not use in direct sunlight. Drying Time: approx. 40 minutes (at room temperature) 

Coverage: depending on the surface. Sandstone: approx. 1 to 4m² per litre Quarry tiles: approx. 5 to 8m² per litre Rough granite: approx. 10 to 15m² per litre